Simple to programme so that only a single button needs to be pressed for a titration, everything
else is automatic. The unique Low Drift Cell glassware design is by far the easiest to use and
also the most robust. Ordinary ground glass joints used by other manufacturer\\\\´s require either
grease or PTFE sleeve to ensure a good seal and to prevent jamming. The patented design joints
used on our Low Drift Cell glassware require neither. Even without grease or PTFE these joints
will not stick or jam. Hassle free assembly and disassembly.
All Low Drift Cell glassware sets are supplied in a purpose designed, impact resistant carry
case. The generator electrodes can be supplied either with or without frit and all electrode
have detachable leads.
The built-in high speed printer provides hard copy of results and even allows duplicate print
outs if required. Results can also be downloaded via the Results Manager software package onto
a pc spreadsheet format. The Aquamax KF is delivered ready for operation and the comprehensive
glassware pack, including electrodes, titration vessel, leads, syringe, printer paper, etc, is
supplied as standard.
Compare the Aquamax KF with any of these coulometers ¨C then ask us the price.
Compare the Aquamax KF moisture meter with coulometric Karl Fischer titrators supplied by Brinkmann,
Denver, KAM Controls, CSC Scientific, Cosa Instrument Corporation, JM Science, EMD Chemicals.
Aquamax KF moisture meters are a low cost, compact alternative to Metrohm 652 KF, 684KF, 756KF, 831KF,
787KF Titrino, 795KF Titrino, Mettler Toledo DL31, DL32, DL38, DL39, Mitsubishi CA02, CA05, CA06, CA10,
CA20, CA21, CA100, CA200, KEM MKC510, MKC500, Aquapal, Hiranuma Aquacounter AQ 2100, AQV-300, AQ 300,
and KAM Controls titrators for measuring water content by coulometric Karl Fischer titration
Just some of our many applications
Aquamax KF moisture meters are widely used for measuring water content of samples including crude oils,
petroleum products, electrical insulating oils, transformer oils, insulating liquids, natural gas,
refrigerant gas, biodiesel, solvents, inks, mineral oil, ethylene glycols, polyols, aviation fuels,
kerosene, brake fluids, hydraulic fluids, antifreeze, lubricating oils, organic liquids, naptha, paraffin
wax, hydrocarbons, hexane, toluene, alcohols, ethanol, isopropanol, ethers, THF, liquid paraffin, hexane,
petroleum ether, xylene, freons, gasoline, silicone oil, turbine oil, freeze dried powders, etc.

The correct result every time
At the heart of the Aquamax KF is GR Scientific\\\\´s state of the art ACE Control System. This patented
Automatically Compensated Errors system guarantees that the electrolysis current produced and the count
rate displayed are always correctly synchronised, regardless of changes to the electrolysis cell resistance.

Technical specifications
Titration method Coulometric Karl Fischer titration 
Electrolysis control  Patented \\\\\\\"ACE\\\\\\\" Control System (GB2370641)
End point detection  AC polarisation 
End point indication  visual display
print out
acoustic beep 
Display  40 character alphanumeric backlit LCD 
Measuring range  1µg - 10mg water  
Moisture range  1ppm - 100% water
Max. sensitivity  0.1µg
Max. titration speed  2 mg per minute 
Max. current  400 ma 
Drift compensation  Automatically controlled 
Start delay time  0-30 minutes, user programmable 
End delay time  0-30 minutes, user programmable 
Power supply  90-264VAC, 47-63 Hz, 12V DC car adapter/internal battery 
Precision  10 - 100µg ¡À 3µg
100µg - 1mg ¡À 5µg
above 1mg ¡À 0.5% 
Calculation modes  User programmable calcualtions:- Weight/weight,
Volume/density, Volume/volume, Weight/dilution ratio. 
Display format  µg, mg/kg, ppm, % 
Print format  µg, count plus calculated mg/kg, ppm,% water
Statistics  Up to 99 runs, user programmable
Method storage  10 programmable methods 
Sample ID number  user programmable 
Printer  42 character high speed thermal printer
Stirrer speed  Microprocessor controlled 
Battery Life  8 Hours running time from fully charged 
Charging time  Fully charged 14 hours
Battery low indication  Display & print out indication 
Dimensions  10x 9½ x 5 inches (250 x 245 x 120mm) 
Weight 6 pounds (3kg)
Carry case  Optional 
Calender/clock Analysis time & date print out